10 kV on-column transformer equipment products
The 10 kV on-column transformer equipment is a complete set of products suitable for distribution systems such as urban power grid, rural power grid transformation, industrial and mining enterprises, street lighting, residential quarters, etc., according to the design scheme in Typical Design of Distribution Network Project of State Grid Corporation of China (2016 Edition)—10 kV Distribution Transformer Volume, which meets the requirements of modern distribution network such as safety, reliability, durability, reasonable structure, advanced technology, flexibility, reliability, economy and high efficiency.
YB-12 series pre-installed transformer (European box-type substation)
YB-12 series pre-installed substations comply with GB17467-1998 High-voltage/Low-voltage Prefabricated Substation and IEC1330 standards, etc. This series of substations is mainly a perfect distribution device composed of four parts: shell, transformer, low voltage switchgear and high voltage switchgear. Because of its small size, compact structure, small occupied area and convenient relocation, it greatly shortens the capital construction cycle, reduces the occupied area and reduces the capital construction cost.
In order to satisfy the general interchangeable use of equipment from different manufacturers in a certain range and a certain period, and improve the convenience of operation and maintenance of box-type substations, the Equipment Management Department of State Grid Co., Ltd. organized China Electric Power Research Institute, design institutes, operation units, manufacturing enterprises, testing institutions and other units to carry out typical structural schemes, high voltage chambers, low voltage chambers, civil engineering interfaces and other standardized design work of 10 kV high voltage/low voltage pre-installed substations (hereinafter referred to as "box-type substations") products, so as to facilitate the replacement of qualified products from other enterprises at any time when products fail during operation or quality problems are found by random inspection
Primary and secondary fusion ring main unit
(YHSM) XGN-12 ring main unit is fully insulated and suitable for distribution automation. It is a compact and expandable metal enclosed switchgear with the characteristics of miniaturization, complete parameters and less maintenance. The product has three-station arc extinguishing chamber of "closing-opening-grounding", with "five prevention" function (preventing the main switch from opening and closing with load; preventing straying into the live barrier; preventing the main switch from opening and closing by mistake; preventing live grounding wire; and preventing grounding switch from sending electricity at grounding position), and high fracture insulation strength, large climbing distance design. All outgoing lines are protected by fully insulated elbow cable heads. The product has fixed and sealed design, advanced technical performance and portable and flexible assembly scheme, which can meet the changing requirements of the market, and it is a new generation of high voltage switchgear equipped for urban power grid.
S20, S22 series oil immersed transformer
Core structure: The core is made of silicon steel sheet material with high permeability and low loss, and the stepped multi-level joint structure is conducive to reducing no-load loss and no-load current; Anti-loose structure for core tension and clamping.
GGD AC low voltage fixed switchgear
GGD AC low voltage fixed switchgear is suitable for power conversion, distribution and control of power, lighting and distribution equipment in power distribution system with 50 Hz current, rated operating voltage of 380 V and rated operating current of 3150 A for power users such as power plants, power distribution stations and industrial and mining enterprises.
GCS low voltage draw-out switch cabinet
GCS low voltage draw-out switchgear is designed and developed by the joint design group of the two national departments according to the requirements of the competent departments of the industry, the vast number of power users and design units, which is in line with the national conditions, has high technical performance indicators, can meet the needs of the development of the power market and can compete with the existing imported products. The equipment passed the appraisal jointly hosted by two departments in Shanghai in July 1996. It is valued and affirmed by manufacturing units and power users.
Standardized customized low voltage switchgear (SLVA)
In order to further deepen the standardization construction of distribution network and promote the distribution equipment to move towards the middle and high end, the Equipment Department of State Grid Co., Ltd. organized the State Grid Shanghai Municipal Electric Power Company, China Electric Power Research Institute, operating units, testing and certification institutions and manufacturing enterprises to carry out the compilation of Standardization Design Scheme for Low Voltage Switchgear.
Contact us
Tel:+86-371-55033377
Fax:+86-371-55033377
Email:hnyuhe@vip.126.com
Factory address: North Section of Xueyuan Road, Luoxin Industrial Cluster Area, Luoyang City
Social media
Mobile terminal
Copyright©Henan Yu He Electrical Co., Ltd.
This website already supports IPV6 Business license Powered by www.300.cn | SEO
SAF Coolest v1.3 设置面板 PBISS-ANSZ-YSZSE-WXV
无数据提示
Sorry,当前栏目暂无内容!
您可以查看其他栏目或返回 首页